E-flite Habu 32x DF ARF RC Airplane

The Sport-Jet Sensation:
Since 2008, when the ParkZone® Habu was first introduced, jet jocks and speed fans worldwide have flocked to the Habu line of EDF jets for the sporty looks and great performance. The E-flite® Habu 32 DF is the largest in the series and has delivered pro-grade performance to the club field environment. The new E-flite® Habu 32x DF jet takes electric ducted fan (EDF) performance and engineering to new heights.                                                                                                                             Designed around the E-flite Delta-V® 32 80mm fan unit and high-speed DF32 brushless motor, its hyper-efficient intake and exhaust ducting deliver a potent power system that produces a large amount of thrust available as quickly as you can move the throttle stick. The new swept-back wing and horizontal stabilizers enhance the sleek appearance. The result is a sport EDF that will give even experienced jet jockeys goose bumps. The Habu 32x DF boasts a level of fit and finish that is every bit as impressive as its performance. Even more satisfying is the short amount of time you’ll need to get this hot-rod flight-ready. The recommended E-flite accessories and Spektrum™ radio gear can help provide the smoothest build possible, as well as flight performance even the discerning modeler and expert pilot can appreciate.                                                                                                                                                                                                            Rigid Construction: 
The new swept-back planform of the wings and horizontal stabilizers feature full-balsa sheeting and genuine UltraCote® film covering. The wings attach to the fuselage using carbon fiber blade spars that fit into aluminum sockets for a rigid structure that can handle incredible speeds and G-loads.                                                                                                                                                                                               Retract Ready:
The Habu 32x DF features built-in wheel wells and hard-points that easily accept the required retracts such as the E-flite 15-25 size electric retracts (sold separately). The gear doors included improve streamlining and conceal the main landing gear struts when they’re retracted.                                                                                                                                                                                                                                         Fast Assembly: 
The ailerons, elevator and flaps use a sealed-hinge of genuine Hangar 9® UltraCote® covering for a clean look and less drag. The complex, bifurcated fiberglass intake ducts are factory installed and perfectly faired inside the fuselage so you can get in the air quicker.

Optimized Ducting:
An optimized intake and exhaust design delivers maximum fan thrust without requiring cheater holes. As a result, the Habu 32x DF delivers outstanding performance in all flight conditions, reduced amp draw, quieter operation and a better flying experience overall.

                                                                                       Easy Access that’s Sleek:
The quick-release hatch makes swapping out batteries and accessing electronics easy. Nose and belly hatches make access to the nose gear and EDF simple. A tinted clear canopy adds greatly to its “real” appearance in flight. Pilot figure not included.                       

 

Product Specifications

Wingspan:

42.0 in (1070mm)

Overall Length:

49.5 in (1250mm)

Wing Area:

412 sq. in. (26.6 sq. dm.)

Flying Weight:

7.05 – 7.50 lb (3.20 – 3.40 kg)

Motor Size:

DF 32 Brushless Motor, 2150Kv

Radio:

6+ Channel Radio System (required)

Servos:

Micro Servos (8 required)

Trim Scheme Colors:

UltraCote – Dark Yellow, Silver, Pearl Charcoal

CG (center of gravity):

4.30-4.90 in (110-125mm) back from the leading edge at wing root

Speed Control :

80-Amp brushless

Recommended Battery:

22.2V 6S 5000mAh 30C LiPo, 10AWG, EC5

Flaps:

Yes

Retracts:

Required (not included)

Experience Level:

Advanced

Recommended Environment:

Outdoor

Assembly Time:

7-9 Hours

 

 

You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Powered by AWS