1/14 electric RC TRACTOR TRUCK KING HAULER

  This is a special edition of Item 56301 King Hauler, which was the first in the Tamiya series of 1/14 scale Tractor Trucks. The King Hauler was first introduced in 1993 and has been a favorite among R/C enthusiasts for many years. The body parts of this edition kit come pre-painted in Metallic Black straight from the factory floor.                                                                                             

  Tamiya’s Tractor Truck Series come with authentic suspension with leaf springs. Power is provided by a 540-size front mounted motor, and 3-speed gear changes are possible via a 4-channel transmitter. Tamiya’s Tractor Trucks may be connected to separately-sold semi-trailers.                                               Black Finished Body

  • Finished Body only available in kit.

  • Replacement unfinished replacements available.                                                                                                                                               Our Semi trucks and Highlifts use 3speed transmissions for more maneuverability and true scale realism. Whether you’re hauling a big load or climbing some rough terrain, the ability to shift into low gear can make the difference. High speed runs are no problem once you kick it into 3rd gear, when its time to move out!

    Both vehicle types require a 4 channel stick type radio for full function. If you’re going to outfit your vehicle with one of our multifunction units (MFU), you will need to choose a analog radio. Shifting into gear is extremely easy once your transmission is adjusted correctly.

    Below you will see the basic concept on how the servo moves the transmission into all three gears. It is best to get the transmission adjusted with your trims centered and only using the collar on the transmission rod to adjust final increments. This will allow for the best operation if you’re using a MFU unit.                                                                                  Make sure to use loctite on the grub screw in the collar to prevent having to readjust the transmission again. Taking a little extra time to set the transmission up will provide you with better performance and less adjustments down the road.

     

     

    Product Specifications (Specifications subject to change)                                  

    Type

    Detail

    Scale

    1/14

    Construction type

    assembly kit

    Terrain use

    on-road

    Drive-train

    4-axle semi

    Drive type

    3-speed

    Drive line

    dog bone

    Differential type

    gear

    Suspension

    leaf spring

    Steering mechanism

    bell-crank

    Shock damper

    friction damper

    Shock damper material

    aluminum

    Tire type

    rubber

    Tire tread

    radial

    Body material

    ABS Plastic

    Chassis material

    aluminum & plastic

    Electronic Speed Control (ESC)

    not included

    ESC model

    n/a

    LED Light buckets

    yes

    LED lights

    no

    Motor

    540-brushed type

    Bearings

    metal bushings

    Adjustable camber

    fixed

    Adjustable toe angles

    fixed

    Adjustable ground clearance

    fixed

    Adjustable gear ratio

    3-speed transmission

    Adjustable wheelbase

    fixed

    Adjustable track width

    fixed

    Adjustable shock angle

    fixed

    Special feature 1

    Body and P parts are replaced with pre-painted Metallic Black parts.

    Special feature 2

    Length: 600mm, Width: 180mm, Height: 255mm.

    Special feature 3

    Coupler is included to enable connection with any currently available Tamiya 1/14 scale trailer.

    Requires A

    4-channel radio gear

    Requires B

    7.2 battery & charger

    Requires C

    electronic speed control

      

                                                                  

You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Powered by AWS