Immersion Vortex 275 PRO ARF 350mW, Zipper Packaging (Metall Danny Edition)

Customized for a Legend

Metall Danny’s thrilling forest flying videos inspired a generation of FPV Pilots. The Vortex 275 Metall Danny Special Edition was customized for Danny, to meet the needs of forest flying. With the classical robustness of the Vortex 250 Pro, longer arms to swing 6″ props, custom 2205 V-Spec motors, and a CCD Camera. In a world where quads are getting smaller, and their ability to carry a GoPro disappears, the Vortex 275 likes to be a little different.                                                                                                                                                                                            

Tuned by a Pro

As with all Vortex quads, pro-tunes are included to eliminate the complex tuning process. Danny has tweaked the PIDs to perfection, and we have included them in the default firmware for the quad.                                                    

Out with Steel, in with Titanium!

The stock Vortex 250 Pro shipped with a steel screw-set. Extremely strong, un-necessary weight when whipping around a dense forest.

The Metall Danny edition replaces this with a Titanium screw set, significantly lighter, and much stronger than aluminium equivalents.                                   

V-Spec 2205-2100kV Power

Custom V-Spec 2205-2100kV motors swing 6″ props with anger! These motors were custom-designed for this quad.

Beautifully milled and anodized, using single-strand wiring.

Robust enough to survive the occasional ‘kiss’ from a passing pine-tree.                                        

Physical meets Virtual

 The Metall Danny Vortex 275 is available in the popular Liftoff simulator.

The larger props, motors, etc. are all simulated using the advanced physical models driving the simulator.

Fly before you Buy!                                                                                                                      

 

PRODUCT SPECIFICATIONS

Initial Release Date: August 2016

Weight: ~435g without battery, or HD camera

Power Requirements: 3s-4s LiPo (typical)

ESCs: Full Custom, 20A cont. 22A peak, rotorSENSE, OneShot125

Motors: Custom V-Spec 2205-2000kV, with 3mm axles, 5mm shafts

Props: OEM HQ 6035

Flight Camera: FatShark 600 TVL CCD (or equivalent)

HD Camera: GoPro Hero, Hero 3/4/5

Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required) (Auto-Sense!)

Flight Time: Highly dependent upon battery, and flying style

Note: Compatible receiver and display device required for initial setup and use, not included.

  

You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Powered by AWS