ImmersionRC Vortex 250 PRO ARF 350mW Race Quad Drone

Customized for a Legend

 Umma Gawd’s piloting skills are speak for themselves. His ability to tune a quad is second to none. We took the stock Vortex 250 Pro, and customized it for Tommy. Out with the 2204s, in with lightweight 2206s. Out with the stock CMOS camera, in with a 600TVL CCD, with great light handling, and a go-pro lens. Out with the stock 4mm arms and steel screw-set, in with ligher weight 3mm arms, and a Titanium screw-set. The result is much better power to weight ratio,  and a quad that is as at home on the race track, or the freestyle circuit.                                                                                                                                                                             

Tuned by a Pro

 As with all Vortex quads, pro-tunes are included to eliminate the complex tuning process. Tommy has tweaked the PIDs to perfection, and we have included them in the default firmware for the quad.                                                   

Out with Steel, in with Titanium!

 The stock Vortex 250 Pro shipped with a steel screw-set. Extremely strong, but unwelcome weight for a quad of this class. The UmmaGawd edition replaces this with a Titanium screw set, significantly lighter, and much stronger than aluminium equivalents.                                                                                                  

Lumenier 2206-2350kV Power

 Lightweight Lumenier 2206-2350kV motors provide the power for this special edition quad. Robust enough to survive the occasional knock, but lighter than most motors int he same class.                                                                                               

Physical meets Virtual

 The UmmaGawd Vortex 250 is available in the popular Liftoff simulator. The larger props, motors, etc. are all simulated using the advanced physical models driving the simulator. Fly before you Buy!

 

 

 

PRODUCT SPECIFICATIONS

Retail Price ($USD): $529 (UmmaGawd Logo zipper case)

Initial Release Date: August 2016

Weight: ~415g without battery, or HD camera

Power Requirements: 3s-4s LiPo (typical)

ESCs: Full Custom, 20A cont. 22A peak, rotorSENSE, OneShot125

Motors: Lumenier 2600-2350kV

Props: Custom Quad-blade in UmmaGawd purple

Flight Camera: FatShark 600 TVL CCD (or equivalent)

HD Camera: GoPro Hero, Hero 3/4/5

Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required) (Auto-Sense!)

Flight Time: Highly dependent upon battery, and flying style

Note: Compatible receiver and display device required for initial setup and use, not included.

 

 

  

  

 

   

 

You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Powered by AWS